The conaction attribute
The conaction attribute allows users to push content from one topic into another. It causes the conref attribute to work in reverse, so that the content is pushed from the current topic into another, rather than pulled from another topic into the current one. Allowable values for conaction are: pushafter, pushbefore, pushreplace, mark, and -dita-use-conref-target.
Note: In the descriptions below, the word target always refers to the element referenced by a conref attribute.
There are three possible functions using the conaction attribute: replacing an element, pushing content before an element, and pushing content after an element. The conaction attribute always declares the desired function while the conref attribute provides the target of the reference using the standard conref syntax.
In each case, an element pushed using conref must be of the same type as, or more specialized than, its target. If the pushed element is more specialized than the target, then it should be generalized when the conref is resolved. This ensures that the content will be valid in the target topic.
• It is valid to push using conref when the two elements involved are of the same type. For example, a step element can use the conref push feature with another step as the target of the conref.
• The target element can be more general than the source. For example, it is legal to push a step element to replace a general list item (li); the step element should be generalized back to a list item during the process.
• It is not possible to push a more general element into a specialized context. For example, it is not legal to push a list item (li) in order to replace a step, because the list item allows many items that are not valid in the specialized context.
Replacing content in another topic
When the conaction attribute is set to "pushreplace", the source element will replace the target specified on the conref attribute. The pushed content remains in the source topic where it was originally authored.
For example, assume that a task in example.dita has the id "example", and contains a step with the id "b":
<task id="example" xml:lang="en">
<title>Example topic</title>
<taskbody>
<steps>
<step id="a"><cmd>A</cmd></step>
<step id="b"><cmd>B</cmd></step>
<step id="c"><cmd>C</cmd></step>
</steps>
</taskbody>
</task>
In order to replace the step with id="b", another topic must combine a conaction value of "pushreplace" with a conref attribute that references this step:
<task id="other" xml:lang="en">
...
<step conaction="pushreplace"
conref="example.dita#example/b">
<cmd>Updated B</cmd>
</step>
...
</task>
The result will be an updated version of example.dita which contains the pushed step:
<task id="example" xml:lang="en">
<title>Example topic</title>
<taskbody>
<steps>
<step id="a"><cmd>A</cmd></step>
<step id="b"><cmd>Updated B</cmd></step>
<step id="c"><cmd>C</cmd></step>
</steps>
</taskbody>
</task>
When resolving a conref push action, attributes are resolved using the same precedence as for normal conref, with one exception. Attributes on the element with the conref attribute (in this case, the source doing the push) will take priority over those on the referenced element. The exception is that if the source element does not specify an ID, the ID on the referenced element remains; if the source element does specify an ID then that replaces the ID on the referenced element.
It is an error for two source topics to replace the same element. Applications MAY warn users if more than one element attempts to replace a single target.
Pushing content before or after another element
Setting the conaction attribute to "pushbefore" allows an element to be pushed before the element referenced by the conref attribute. Likewise, setting the conaction attribute to "pushafter" allows an element to be pushed after the element referenced by the conref attribute. Multiple sources can push content before or after the same target; the order in which that content is pushed is undefined.
When an element is pushed before or after a target, the resulting document will have at least two of that element. Because this is not always valid, a document attempting to push content before or after a target must take an extra step to ensure that the result will be valid. The extra step makes use of the conaction="mark" value.
When pushing before, the conref attribute itself looks just as it did when replacing, but the conaction attribute is set to "mark" because it is marking the target element. This element remains empty; its purpose is to ensure that it is legal to have more than one of the current element. Immediately before the element which marks the target, you will place the content that you actually want to push. This element will set the conaction attribute to "pushbefore".
When pushing after, the procedure is the same, except that the order of the elements is reversed. The element with conaction="pushafter" comes immediately after the element which marks the target.
Attributes on the element which is pushed (the one with conaction="pushbefore") must be retained on the target, apart from the conaction attribute itself. If this causes the result document to end up with duplicate IDs, an application can recover by dropping the duplicate ID, modifying it to ensure uniqueness, or warning the user.
The following restrictions apply when pushing content before or after an element:
• The elements that use conaction="mark" and conaction="pushbefore" are the same type as each other and appear in sequence. This restriction prevents a topic from trying to push a body element before or after another body element, because it is not valid to have two body elements in sequence.
• Either the container elements of the source and target match, or the container of the source element is be a specialization of the target's container. This is also to ensure validity of the target; for example, while it is possible to include multiple titles in a section, it is not possible to do so in a figure. Comparing the parents prevents a second section title from being pushed before a figure title (the resulting figure would not be valid DITA). This restriction only applies to the pushbefore or pushafter actions, not to the pushreplace action.
When content is pushed from one topic to another, it is still rendered in the original context. Processors might delete the empty element that has the conaction="mark" attribute. In order to push content from a topic without actually rendering that topic on its own, the topic should be referenced from the map with the processing-role attribute set to "resource-only".
Example 667. Example: pushing an element before the target
The following example pushes a step before "b" in the example.dita file shown above.
<step conaction="pushbefore"><cmd>Do this before B</cmd></step>
<step conaction="mark" conref="example.dita#example/b">
<cmd/>
</step>
The result contains the pushed step element before "b".
<task id="example" xml:lang="en">
<title>Example topic</title>
<taskbody>
<steps>
<step id="a"><cmd>A</cmd></step>
<step><cmd>Do this before B</cmd></step>
<step id="b"><cmd>B</cmd></step>
<step id="c"><cmd>C</cmd></step>
</steps>
</taskbody>
</task>
Example 668. Example: pushing an element after the target
Pushing an element after a target is exactly the same as pushing before, except that the order of the "mark" element and the pushed element are reversed.
<step conaction="mark" conref="example.dita#example/b">
<cmd/>
</step>
<step conaction="pushafter"><cmd>Do this AFTER B</cmd></step>
In this case the resulting document has the pushed content after step b:
<task id="example" xml:lang="en">
<title>Example topic</title>
<taskbody>
<steps>
<step id="a"><cmd>A</cmd></step>
<step id="b"><cmd>B</cmd></step>
<step><cmd>Do this AFTER B</cmd></step>
<step id="c"><cmd>C</cmd></step>
</steps>
</taskbody>
</task>
Combining conaction with conkeyref or conrefend
The conkeyref attribute can be used as an indirect way to specify a conref target. If the conkeyref attribute is specified on an element that also uses the conaction attribute, the conkeyref attribute is used to determine the target of the conref push (as it would normally be used to determine the target of conref).
The conref push function does not provide the ability to push a range of elements, so it is an error to specify the conrefend attribute together with the conaction attribute. If the two are specified together an application can recover by warning the user, ignoring the conrefend attribute, or with some other implementation strategy.
Parent topic